Blade was designed to experiment and to modify some properties noticed in a Nordkapp PE during a paddle in strong winds and light load. It has less of turning up into wind, more tracking in general, quicker and easier start and staying in surf and more of cutting through the wave tops. We need more testing with different loads and varying weather conditions to write more about its final properties. \r\n
The hatches are covered by neopren that to design are to keep water from entering the watertight compartments. Hatches are further covered by lids that have been cut-out from the deck construction. These stiff lids protect the neopren from direct outside pressure that could push the neopren off and into the hatch.
\r\nBlade does not have a skeg or rudder as its current outfitting.
Contact us for a testpaddle. We would like to get your review for publishing.
\r\n\r\n
Overall Length | \r\n550.3 cm | \r\n
Waterline Length | \r\n524.1 cm | \r\n
Maximum Overall Beam | \r\n53 cm | \r\n
Maximum Waterline Beam | \r\n50.8 cm | \r\n
Maximum Draft | \r\n12.8 cm | \r\n
Design Displacement | \r\n95.89 kg | \r\n
Wetted Surface Area | \r\n1.77 m² | \r\n
Waterplane Area | \r\n1.31 m² | \r\n